Sunday, August 18, 2013

Peter Pan Collar Tutorial for Sis Boom/ Scientific Seamstress Angie Dress

I must confess, I have been sewing for myself this summer. I came across this pattern , the Angie Dress from Sis Boom/ Scientific Seamstress and had to give it a go! I made one with a lace overlay bodice that came out smashing. And I had been eyeing a peter pan collared dress on one of my fav shops. So it dawned on me that hey, this pattern could work with this collar. I made this dress:
And so, here is how I drafted a peter pan collar for it.

First, print out your bodice pieces in the size needed, I went with the standard neckline. Grab your swedish tracing paper, or other paper you can see thru. Joanns also has a grid thin fabric that works well for drafting too. You lay your paper over the front bodice piece and trace the neckline.

Decide how wide you want your collar. I choose 3 inches. It places the collar just a few inches from the sleeve edge. Mark this along the shoulder seam. You have 1/4" seam allowance on this pattern and your collar seam allowance is the same as your pattern. So you do not need to add it in.

Now go to the front of the neckline and mark the same measurement, in my case 3" inches down, make a mark.

I use a drafting ruler to then draw my curved line up to the shoulder line I previously marked. Keep it the same measurement all along the line. Feel free to make the rounded front edge in whatever shape you like: big and round or thin and slightly rounded, up to you. Note you will be cutting 2 pairs ( total of 4 pieces) of mirror image pieces for the front collar pieces.

Follow the same proceedure for the back piece. Be sure you note that you will be cutting the 2 back collar pieces on the fold.

Cut your pieces.

You end up with 4 front pieces: mirror imaged and 2 back pieces cut on the fold.
Pin your collar pieces at each shoulder seam. Sew using a 1/4" seam allowance.
I open them up and finger iron the seam then move onto pinning them right sides together.
Sew your outer edge ONLY. The inner edges will be either bias bound finished or if you are lining your bodice, when you construct the bodice outer and lining, you will sandwich them together.
Carefully clip your rounded edges or I use pinkering scissors and just cut the edges to give a clean rounded edge. Make sure you clip the shoulder seams to help reduce the bulk at the seam.
Turn collar right side out, use a chop stick, boning tool, or other utensil to run along the seam to help it come out. Give the collar a good ironing. Top stitch if you like.

Now that you have your collar you can attach it in a few different methods. I am making another Angie Dress this week using the bias tape method.

If you are lining your bodice, take your collar, lay it on top of the outer bodice fabric, right side up. The peter pan collar ends meet right in the middle. Either mark the neckline center or give it a quick lil iron to help you center the collar points. Lay the lining bodice right side down. Sandwiching the collar between the two. Pin thru all layers. You can also baste the collar then sandwich if it seems to be too many layers. You then sew your seam allowance. turn it right side out and proceed to the bias binding of the sleeves. And the rest of the pattern.

I hope this helps you design the Angie Dress of your dreams! I know I love mine and will be making more garments adding a peter pan collar here 'n there!